• SPEED
    EASY NAVIGATION
    QUICK RESPONSES
    DIRECT SHIPMENTS
    GLOBAL SUPPORT

  • EXCELLENCE
    QUALITY SUPPLIERS
    PROMPT SERVICE
    SA
    TISFACTION IS
    #1 PRIORITY

  • ECONOMICS
    LOWEST PRICES
    FREE FREIGHT
    QUICK DELIVERIES

  • KNOWLEDGE
    FACTORY TRAINED
    OTJ EXPERIENCE
    ENGINEERING SUPPORT

FILTER CARTRIDGES: LOFPLEAT-HV™
INKS, CMP P-O-U, BULK SLURRIES, PAINTS AND COATINGS

 

LOFPLEAT-HV FILTER CARTRIDGELOFPLEAT-HV Multilayer pleated polypropylene filter cartridges are specifically designed for fluids that have agglomerated particles and gels or having a high viscosity.  The LOFPLEAT-HV provides additional depth filtration with its' pleated serialized microfiber matrix.LOFPLEAT-HV PLEATING COMPARED TO STANDARD PLEATING

 

The picture to the right illustrates the special design of the LOFPLEAT-HV pleated filter cartridge.  The top half and lower half of this image compare the typical (top) pleated filter design with the LOFPLEAT-HV™ (bottom).  The thicker and higher LOFPLEAT-HV™ pleats filter agglomerated particles from viscous fluids more efficiently.

 

LOFPLEAT-HV™ filter cartridges are constructed from FDA approved materials that satisfy USP Class VI biological tests for plastics and can be sterilized with an autoclave or in-line with hot water.  LOFPLEAT-HV™ pleated filter cartridges have absolute Beta 1000 (99.9%) retention and 2.2 to 2.4 ft2 surface area.

 

LOFPLEAT-HV Part Numbering Table:

LOFPLEAT-HV PART NUMBERS

LOFPLEAT-HV END CONFIGURATIONS

LOFPLEAT-HV END CONFIGURATIONS

LOFPLEAT-HV Specifications: (sold individually)

NOMINAL LENGTHS: 5", 10", 20", 30"& 40"
RETENTIONS (MICRONS): 0.45, 0.5, 1, 3, 5, 10, 20 & 40
MATERIAL OF CONSTRUCTION
Polypropylene
OUTSIDE DIAMETER

2.7" (69mm)
INSIDE DIAMETER

1.0" (25.4mm)
SURFACE AREA

2.2 ft2 (0.2m2) per 10" (25.4cm) length
ADDITIONAL SPECIFICATIONS

Maximum operating temperature
80°C (176°F)
Max. differential pressure
5.2 bar @ 21°C (75 psid @ 70°F)

2.8 bar @ 80°C (40 psid @ 176°F)
1.03 bar @ 88°C (15 psid @ 190°F)
Max. reverse differential pressure
2.4 bar @ 27°C (40 psid @ 70°F)
Recommended change-out pressure for disposal
2.4 bar (35 psid)

LOFPLEAT-HV Water Flow Rate Differential Pressure Chart:
LOFPLEAT-HV DIFFERENTIAL PRESSURE CHART
LOFPLEAT-HV Filtration Efficiency Chart:
LOFPLEAT-HV FILTRATION EFFICIENCY CHART